DIYHiFi.org
http://www.diyhifi.org/forums/

Wanted to Buy: Seas H763 6-1/2" Aluminum Cone Woofer (older
http://www.diyhifi.org/forums/viewtopic.php?f=12&t=2123
Page 1 of 1

Author:  dtm1962 [ Fri Dec 31, 2010 8:15 am ]
Post subject:  Wanted to Buy: Seas H763 6-1/2" Aluminum Cone Woofer (older

I am looking for 1 or 2 Seas Aluminum 6-1/2" woofer Model H763 (older version of L17RCY/P).

I have a pair speakers that our curious cat has damaged the surround on one of the woofers.

Let me know if you have one or two sitting around and you are willing to sell.

I can pay via PayPal and I have US & Canadian mailing addresses. (The benefit of living on the border of the US).

Let me know the cost as well.

Thanks in advance,

Dan

Author:  dtm1962 [ Sat Jan 01, 2011 4:42 am ]
Post subject:  Re: Wanted to Buy: Seas H763 6-1/2" Aluminum Cone Woofer (older

And/or a pair of Seas H1006 - L17REX/P & Seas H1008 - L17RE/P will also work with a few modifications in the crossover.

Let me know what you have

Thanks,

Dan

Author:  dtm1962 [ Sat Jan 01, 2011 5:09 pm ]
Post subject:  Want to Buy:Seas H763, H1006, H1008 or Excel E009 7"Alum Woo

Thanks to the curious family cat who damaged my Seas H763 7" aluminum woofer's rubber surround on one of my towers, I am in need of a pair of replacement drivers that will fit in the 170 mm rebate cut in front baffle to make drivers flush. These will be 1st generation Aluminum (Al-Mg) drivers from Seas that have an overall diameter of 170 mm. (6-3/4")

Any pair of the following 7" Aluminum drivers will work with a slight crossover adjustment:

Seas H763 - L17RCY/P (original)
Seas H1006 - L17REX/P,
Seas H1008 - L17RE/P
Seas Excel E009 - W17E-002 (Alum-Mag Cone with Phase Plug)

Let me know what you have and your price.

I can pay via PayPal and I have Canadian & US mailing addresses as well to make it easier for any US sellers who do not want to deal with Canadian customs etc.

Thanks,
__________________
Dan

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/